Ask Proxima Impact WSX Instrucciones de operaciones descargar pdf (Pagina 6)

CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN allows you

to boost the signal of each individual channel depending on how low

or high its input level is.

3 BAND EQUALIZER: The 3 BAND EQUALIZER adjusts the tone of

each CHANNEL by giving you a choice 3 frequencies (BANDS) to

adjust , from LOW, MIDRANGE (MID) and HIGH’s ,you can use the

adjustment knobs to higher or lower the 3 separate frequencies till the

sound of the music program is appropriate for your listening

environment.

CHANNEL INPUT SELECTOR: The CHANNEL INPUT SELECTOR

switches allow you to choose which input will be controlled by that

channels corresponding volume FADER.

For example on CHANNEL (1) the INPUT SELECTOR allows you to

choose between CD 1 and PHONO 1/LINE 1, and also on

CHANNEL (2) the INPUT SELECTOR SWITCH will let you choose

between PHONO 2/LINE 4 and CD 2 .

CHANNEL VOLUME FADER: After you have chosen which input you will

use with the INPUT SELECTOR the corresponding CHANNEL FADER

will allow you to adjust the volume for that particular CHANNEL.

MICROPHONE VOLUME: Allows you to adjust the volume of the

microphone signal. Both MIC inputs are controlled by the same rotary.

MASTER OUTPUT ROTARY KNOB: The MASTER OUTPUT rotary knob

adjust the volume of the MAIN MASTER output.

CUE/PGM MIX ROTARY KNOB: The CUE/PGM MIX ROTARY KNOB

adjusts the mix between the CUE signal and the main output signal in

your HEADPHONE MONITOR OUTPUT.

CUE VOLUME ROTARY KNOB: The CUE VOLUME ROTARY KNOB

adjusts your HEADPHONE MONITOR OUTPUT’S volume.

CHANNEL CUE SELECTOR: The CHANNEL CUE SELECTOR allows you

to choose which channel you wish to monitor in your headphones, to the

left is CHANNEL (1) to the right is CHANNEL (2).

VU METER: The CDMP-6000 has a stereo VU METER that allows you to

monitor the decibel levels of the LEFT and RIGHT MASTER

output.

VU MASTER/CUE SWITCH: This switch controls what output the VU

METER will display, in the master position the VU will display the

MASTER output of the CDMP-6000 and in the CUE position the left VU

will display the channel (1)‘s CUE output and the right VU will display

channel (2)‘s CUE output.

CROSS FADER: The CROSS FADER allows you to mix evenly from one

source to another. The CROSS FADER on the CDMP-6000 is also re-

movable and if the need arises can be replaced.The RG-45 (RAIL-

GLIDE™) DUAL-RAIL CROSS FADER, which has internal dual stainless

steel rails that allow the slider to ride smoothly and accurately from

end to end can be purchased from your local GEMINI dealer.

NOTE: WHEN USING THE CROSS FADER LIGHTLY GLIDE THE FADER

BACK AND FORTH. PRESSING DOWN ON THE CONTROLS CAN

BEND CONTACTS AND CAUSE A LOSS OF SOUND.

GENERAL:

Type................................................................................Compact Disc Player

Disc Type...................................Standard Compact discs (12 cm & 8 cm)

Time Display......................Track Elapsed, Track Remain, or Total remain

Variable Pitch.......................................± 24% Slider with Resume Switch

Pitch Bend............................................................................± 24% Maximum

Instant Start....................................................................Within 0.03 seconds

Installation...........................................................................................19" each

Dimensions........................... 19" x 3.5" x 10" (482.6 x 88.9 x 254 mm)

Weight..........................................................Main unit: 11.35 lbs. (5.14 kg)

AUDIO SECTION:

Quantization......................................1 Bit Linear/Channel, 3 Beam Laser

Oversampling Rate..............................................................................8 Times

Sampling Frequency..........................................................................44.1 kHz

Frequency Response............................................................20 Hz to 20 kHz

Total Harmonic Distortion...................................................Less Than 0.05%

Signal to Noise Ratio..............................................................................85 dB

Dynamic Range........................................................................................85 dB

Channel Separation.................................................................85 dB (1 KHz)

Output Level...................................................................2.0 +/- 0.2V R.M.S.

Power Supply.......................................................AC 115/230V, 60/50 Hz

INPUTS:

Phono.............................................................................3mV,47 KOhm

Line..........................................................................150 mV, 27 KOhm

MIC...................................................................1.5 mV, 1 KO balanced

OUTPUTS:

Max..........................................................................20V Peak-to Peak

Rec.............................................................................225 mV, 5 KOhm

SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE FOR PURPOSE OF IMPROVEMENT.

1. UNSCREW THE FADER (B) SCREWS. DO NOT TOUCH INSIDE SCREWS (C) CARE-

FULLY

REMOVE OLD CROSS FADER AND UN-

PLUG CABLE (D)

2. PLUG IN THE NEW CROSS FADER INTO

CABLE (D) AND PLACE BACK INTO MIXER.

3. SCREW THE CROSS FADER TO MIXER

WITH THE FADER PLATE SCREWS (B)

4. REPLACE THE FACE OF THE MIXER AND

SCREW THE FOUR SCREWS BACK IN AND REPLACE THE FADER KNOBS.

CDMP-6000

MIXER SECTION:

FADER REPLACEMENT

SPECIFICATIONS

The CURVE selector lets you choose between two fader

CURVE settings, positioning the switch to the left will give

you a gradual CROSSFADE and positioning the switch to the

right will give you a quick CROSSFADE

HEADPHONE OUTPUT: The HEADPHONE OUTPUT located at the

front of the CDMP-6000 will accept any headphone with a standard

1/4” connector and or adapter and will allow you to CUE your music

program before you play it, you can adjust the volume and PGM mix

of the HEADPHONE (see CONTROLS)

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Comentarios a estos manuales

Sin comentarios

Ask Proxima Impact WSX Instrucciones de operaciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores Ask Proxima Impact WSX