Ask-proxima 9100 Manual de usuario descargar pdf (Pagina 74)

Maintenance

5-3

REPLACING THE LAMP

For best performance, you should replace the lamp after 700 hours of

operation.

Note: Do not touch the lamp with your bare hands. Use gloves or a soft cloth

and handle it using the metal ends only.

Removing the old lamp

1 Leave the projector running with the lamp off for at least five minutes

before you change the lamp. This allows the fan to cool the lamp

chamber.

2 After the lamp has cooled sufficiently, turn off the projector and unplug

the power cord. (As a safety feature, the lamp chamber can’t be opened

until the power cord has been removed.)

3 Slide the AC lock button in the direction of the arrow. This button will

not move unless the power cord has been disconnected from the

projector.

4 While sliding the AC lock button, remove the left side cover by sliding it

about 1/4 of an inch to the left. When the cover releases, pull it straight

off (see Figure 5-2).

Figure 5-2, Sliding the rear panel off of the projector

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 102 103

Sin comentarios

Ask-proxima 9100 Manual de usuario Pagina 74