Ask-proxima Ultralight LS1 Manual de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
c
AIR FILTER CARE AND CLEANING
:
The removable air filter prevents dust from accumulatirvg on the surface of the projection lens and the projection
mirror, ^ould the air fitter become clogged with dust particles, it will reduce the cooling fan's effectiveness and
may result in interrvai heat build up and shorten the life of the projector.
We reconunend to clean the air fitter following the procedures below:
1. Turn the POWER ON/OFF button OFF. ar>d disconnect the AC power
cord from the AC outlet
2. Remove the air fitter cover.
Press the cover tatch sideway and lift the cover.
3. Remove the air fitter from the filter cover.
4. Clean the air filter with a vacuum cleaner.
5. Replace the air filter. Make sure that air filter cover is fully inserted.
A
CAUTION
Oo not operate the projector with air fitter removed.
3
RECOMMENDATION
We recommend to avoid dusty/smoky place for operating
the projector. Using in dusty place may cause the picture
of poor quality.
When using under the dusty or smoky conditions, dust may
accumulate on the liquid crystal panel and lens inside it. and may
resuttantty be projected on the screen together with the picture.
When the above symptoms are noticed contact your authonzed
dealer or service stafion for the cleaning.
AIR FILTER
AIR FILTER
COVER
3
C
TEMPERATURE WARNING INDICATOR
TEMPERATURE WARNING INDICATOR flashes red when the internal
temperature of the projector exceeds the normal temperature.
Possible causes for the temperature warning may be:
1. Ventilation slots of the projector are blocked. In such an event,
reposition the projector so that ventilation slots are not obstructed.
2. Air filter is clogged with dust particles. Remove dust from the air filter by
following instrucbons in the Air Filter Care and Cteanrng section above.
3. If temperature warning indicator remains on after performir>g the
checks listed above, coofing fan/intemal circuits may be
malfunctioning. Request an authorized dealer or service station for
maintenance.
TEMPERATURE
WARNING
INDICATOR
45..
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49

Comentarios a estos manuales

Sin comentarios